156
Difference Setpoint Control, On - Off
The Difference Setpoint Control 156 is designed to transfer heat from an intermittent heat source to a storage tank. This control can be used in applications ranging from solar thermal to wood boiler systems. Two sensors are used to measure the temperature at the source and at the storage location, and begin heat transfer when there is a positive difference between them. This product uses a single 240 V (ac) rated relay to accomplish this.
Features
- 24 V (ac) or 24 V (dc) power supply
- Monitor minimum and maximum temperatures for source and storage
- Displays number of running hours of the relay
- Displays Delta-T hours to perform energy calculation
Literature
Select a Model
Select options below to identify the UPC, Order Code, and Repair Kit for a specific 156
No results found
Share this Product
Approval/Certification Information
For product-specific approval information, please refer to the product’s specification sheet (see literature section above) or ask a Watts representative. For general information regarding any approval certification partners identified in the specification sheet, please visit our certification partners’ websites:
| ASSE | CSA | FM Approvals | NSF |
| UL | ULC | USC | WQA |